Toshiba SD-P1880SE owner manual Connecting to a TV or audio system, Connections

Connections

Connecting to a TV or audio system

Connect the player to your TV or audio system.

For details of output sound, see 40 .

Connecting to a TV

Signal flow

To AV OUT

		(red)
	To audio inputs		TV or monitor with
Audio/video		(white)	audio/video inputs
cable (supplied)
	To video input
		(yellow)

• Make the following setting.

On-screen display	Select:	Page
“Digital Out”	“Analog 2ch”	46
		50

Notes

If you connect an audio/video cable (external output cord) to the AV-OUT jack, video is not displayed on the LCD of the player because the player switches to external output mode. Disconnect the audio/video cable when you want to display video on the LCD of the player.

•Refer to the owner’s manual of the connected TV as well.

•When you connect the player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.

•Connect the player directly to your TV. If you connect the player to a VTR, TV/VTR combination or video selector, the playback picture may be distorted as DVD video discs are copy protected.

To switch LCD screen / Memory Card / AV-IN

Select a mode other than AV-IN to output to an external device connected to the player.

Press MODE button on the player.

Each time the button is pressed, the

LCD will change as below.

Normal

Memory Card

AV-IN

Normal:	Outputs video and audio to the LCD
	of the player only.

Memory Card: To switch to the Memory Card mode.

AV-IN:	Inputs video and audio from an
	external device such as a VTR
	connected to the LCD of the player,
	thus allowing you to view video on
	the LCD of the player.

Note

•Normal will be set the next time the player is turned on even if you turn the power of the player off while AV-IN is set.

54