Before Operation - DVD Part (Continued)
Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. Ratings are country dependent. The Parental Control feature allows you to prevent discs from being played by your children or to have certain discs played with alternative scenes.
| Disc Audio | 8 |
| Disc Subtitle | 7 |
| Disc Menu | 6 |
| Rating | 5 |
| Area Code | 4 |
| TV Aspect | 3 |
| Menu Language | 2 |
| Progressive Scan | 1 |
| Digital Audio Output | Unlock |
|
| Change |
| Others |
|
1 | Select Rating on the Setup menu using v/V | |
buttons. |
|
2 While Rating is selected, press B.
3 When you have not entered a password yet. Enter a
When you have already entered a password; Enter a
If you make a mistake before pressing ENTER, press CLEAR and enter
4 Select a rating from 1 to 8 using v/Vbuttons.
Level 1 : DVD software for adults cannot be played back.
Level 8 : All DVD software can be played back. The limitation will be more severe as the level number is lower.
Unlock: If you select Unlock, Parental Control is not active. The disc will play in full.
Ratings 1 to 8: Some discs contain scenes not suitable for children. If you set a rating for the DVD+VCR, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback will stop. You must enter the
5 Press ENTER to confirm your rating selection, then press SETUP to exit the menu.
Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list (See “Country/Area Code List”, page 43.).
|
| Disc Audio | Code Set | |
|
| Disc Subtitle | U S | |
|
| Disc Menu |
|
|
|
| Rating |
| |
|
| Area Code |
|
|
|
| TV Aspect |
| |
|
| Menu Language |
| |
|
| Progressive Scan |
|
|
|
| Digital Audio Output |
| |
|
|
|
|
|
|
|
|
|
|
|
| Others |
| |
|
|
|
|
|
1 | Select Area Code using the v/Vbuttons on the |
setup menu. | |
2 | While Area Code is selected, press B. |
3 Follow step 3 of “Rating” on left. | |
4 | Select the first character using the v/Vbuttons. |
| Press 2to shift to second character and select |
5 the second character using v/Vbuttons. |
6 Press ENTER to confirm your Area code selection, then press SETUP to exit the menu.
Note
Confirmation of the
1Follow Steps
2 Enter the old password, then press ENTER.
3 Select Change using v/Vbuttons then press
ENTER.
4 Enter the new
verify by pressing ENTER.
6 Press SETUP to exit the menu.
If you forget yourIf you forget your password, clear the current password by following the procedure below.
1Press SETUP to display the setup menu. Move the cursor down to “Rating”.
2Use the Number buttons to enter “210499”. The
cursor will move up to “Disc Audio” automatically.
The
3Enter a new password as shown above to the left (Rating).
PREPARATION