Connections (Continued)

Basic TV Connections

zMake one of the following connections, depending on the capabilities of your existing equipment.

RF coaxial connection

Connect the RF.OUT jack on the DVD+VCR to the antenna in jack on the TV using the 75-ohm Coaxial Cable supplied (R).

Note

If you use this connection, tune the TV to the DVD+VCR’s RF output channel (CH 3 or 4).

How to set the DVD+VCR’s RF output channel

1.When the DVD+VCR is turned off, press and hold CHANNEL vor CHANNEL Von the front panel for about five seconds.

It will turn itself on and “RF 03” or “RF 04” appears in the display window.

2.Press CHANNEL vor CHANNEL Von the front panel or CH/TRK (+/-) on the remote control to change the RF output channel (CH 03 or CH 04).

3.Turn off and on the DVD+VCR.

4.Press the TV CH to 3 or 4 depending on the RF output channel you had selected.

Now you can watch the DVD+VCR playback on CH3 or CH4 of your TV.

Audio/Video connection

1

Connect the DVD/VHS VIDEO OUT jack on the

DVD+VCR to the video in jack on the TV using the

video cable supplied (V).

2 Connect the Left and Right DVD/VHS AUDIO OUT jacks on the DVD+VCR to the audio left/right in jacks on the TV (A1) using the supplied audio cables.

Note

If you use this connection, set the TV’s source selector to VIDEO.

Rear of TV

ANTENNA

AUDIO INPUT

VIDEO

INPUT

INPUT

 

 

 

L

R

 

R

A1

V

Rear of DVD+VCR

1-60