Press VCR MENU and the MAIN menu will appear.
Press VCR MENU and the MAIN menu will appear.

Before Operation - VCR Part (Continued)

Setting the VCR Setup Menu

1

2 Press v/Vto select the SETUP menu, then press ENTER.

The SETUP menu will appear.

Channel Selection

This DVD+VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125.

Preparation:

zConnect the DVD+VCR to the desired type of antenna or cable TV system, as shown in Connecting Antenna/Cable TV to DVD+VCR on page 11.

3 Press v/Vto choose a desired option on the SETUP menu. Then press b/Bto choose a desired setting.

FUNCTION OSD

The on-screen display of this DVD+VCR can be turned on or off.

zFUNCTION OSD can be switched between ON and OFF by pressing b/B.

LANGUAGE SELECT

The on-screen programming of this DVD+VCR can be displayed in either English, Spanish, or French.

zLANGUAGE SELECT can be switched among ENGLISH, SPANISH and FRENCH by pressing b/B.

AUDIO MODE

The DVD+VCR has two separate audio playback systems, the high quality VHS Hi-Fi system and standard NORMAL mono sys- tem. The same audio is generally recorded on both systems. The VHS Hi-Fi system plays on separate (left and right) channels, and the NORMAL system plays monaural sound. The normal track is always played so the cassette can be played on a DVD+VCR that does not have VHS Hi-Fi.

zAUDIO MODE can be switched between HI-FI and NORMAL by pressing b/B.

BROADCAST TYPE (STEREO/SAP/MONO)

Multichannel Television Sound (MTS) carries stereo and/or Second Audio Program (SAP) bilingual signals. Set this display to the desired position when both MTS stereo and SAP signals are received. When only one of the MTS signal is received, the DVD+VCR automatically selects the corresponding receiving mode (Stereo or SAP) regardless of the selected position. For normal operation, the display should be in the STEREO position. The DVD+VCR will then record a STEREO program when available, and record a mono program IF the program is NOT IN STEREO. For weak STEREO and/or SAP broadcasts, changing the display to mono may give clearer sound.

zBROADCAST TYPE can be switched among STEREO, SAP, and MONO by pressing b/B.

AUDIO OUTPUT (STEREO/LEFT/RIGHT)

Used during playback [when AUDIO MODE (HI-FI/NORMAL) is in HI-FI position] for selecting the audio output signals from the AUDIO OUT terminals (L ch and R ch), and RF.OUT.

This display setting should normally be left in the stereo posi- tion, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels.

zAUDIO OUTPUT can be switched among STEREO, LEFT, and RIGHT by pressing b/B.

4 Press VCR MENU when finished.

AUTO CHANNEL PROGRAMMING

1

2 Press v/Vto select the TUNING menu, then press ENTER.

The TUNING menu will appear.

3 Press Vto choose the SOURCE SELECT option, then press b/Bto select TUNER.

Press b/Brepeatedly to switch among TUNER, LINE1 and LINE2.

4 Press v/Vto choose the AUTO CHANNEL SET option, then press b/Bto set the channel. The tuner will automatically cycle through all available channels in the area and place them in the tuner’s memory.

5 After the AUTO CHANNEL SET PROCEEDING is complete, make sure the TUNING BAND is set appropriately (TV or CATV) by pressing v/Vand choosing the correct TUNING BAND (TV or CATV) by pressing b/Busing the TUNING menu.

Remember, TV is for the air antenna reception, CATV is for cable or wireless cable connection.

6 Press VCR MENU to return to the TV screen.

7 Use CH/TRK (+/-) or CHANNEL (v/V) on the front panel to cycle the DVD+VCR through the channels in memory.

TO ADD OR ERASE CHANNELS FROM MEMORY

This feature allows you to add or erase channels from memory manually.

1Press Vto choose the CH. ADD/DEL option on the TUNING menu. Press b/Bto select a channel to add or erase.

2Press ENTER to add or erase the channel. Repeat steps 1 and 2 to add or erase channels.

3Press VCR MENU to return to the TV screen.

1-64