Other functions (VCR)
Duplicating a video tape
If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power.
VCR DVD
2
1 
4
5
Duplicating a video tape
Preparation:
•Turn ON the TV and select the corresponding video input.
•Press VCR DVD selector to select the VCR mode. (The VCR indicator will light.)
•Load a cassette tape with the erase prevention tab intact.
•Load a previously recorded tape into the playback VCR or Camcorder.
1 Press SP/SLP to select the desired tape speed SP or SLP.
SP/SLP | It is recommended that you set the |
PLAY MODE | tape speed to the SP mode on the |
| |
| recording VCR for best results. |
|
|
2 Press INPUT SELECT once or twice to select AUDIO/VIDEO input position.
“L1” or “L2” will appear in the display.
INPUT SELECT
PROGESSIVE
L1: on the rear panel
L2: on the front panel
3 Press PLAY on the playback VCR or Camcorder.
4 Press REC/OTR on the recording VCR. The duplicating process begins.
REC/OTR
Connection with second VCR
Playback VCR
To VIDEO OUT 
To AUDIO (R) OUT To AUDIO (L) OUT
AUDIO/VIDEO cable (supplied)
Recording VCR
To VIDEO IN 
To AUDIO (R) IN
To AUDIO (L) IN
Connection with Camcorder
Playback Camcorder
To AV Jack
Recording VCR
| To AUDIO (R) IN |
| To AUDIO (L) IN |
To VIDEO IN | AUDIO/VIDEO cable (not supplied) |
5 Press STOP after duplicating a video tape.
For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above.
40
2C53301C | 40 |
21/4/04, 11:12
