![](/images/new-backgrounds/1127738/12773837x1.webp)
S-video output/input
An
Component video outputs/inputs
PROGRESSIVE outputs/inputs
Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker.
INTERLACED outputs/inputs
Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy the highest quality DVD picture playback.
Notes:
•Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y,
•In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.
Connecting to an audio system and TV equipped with
Note: The
Signal flow
Connections
(white) | To ANALOG |
| AUDIO OUT |
(red) |
|
To wall outlet
To S- | To PR/CR | To PB/CB | To Y |
VIDEO | VIDEO | VIDEO | VIDEO |
OUT | OUT | OUT | OUT |
When you make this connection, set the
And also you must select the corresponding video input on your TV.
Component video | Audio cable (not supplied) |
| |
|
| ||
cable (not supplied) | To audio inputs of |
| |
|
| ||
To Y video input | the amplifier |
| |
(red) | (white) | ||
|
To PB/CB video input
To PR/CR video input
To
If you connect the DVD/VCR to your TV with the DVD OUT jacks, select the corresponding video input on your television to watch DVD video discs.
TV or monitor with | Audio system |
ColorStream® |
|
component video inputs |
|
Notes:
•Refer to the owner’s manual of the connected equipment as well.
•When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
•If you place the DVD/VCR near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD/ VCR away from the tuner and radio.
•The output sound of the DVD/VCR has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
•Turn off the amplifier before you connect or disconnect the DVD/VCR’s power cord. If you leave the amplifier power on, the speakers may be damaged.
•When connecting to a TV using the Video or ” on the display window is not lit. If it is lit, the Video and
19
2C53301C | 19 |
21/4/04, 11:10