Connections
Connecting to optional equipment
You can enjoy high quality dynamic sounds of DVD video discs or |
|
|
|
| |
audio CDs by connecting the DVD/VCR to optional audio | • This selection uses the following reference mark. | ||||
equipment. |
| ||||
|
|
| : Front speaker | : Center speaker | |
For connection to your TV, see “Connecting to a TV” | 18 19 . |
|
| ||
|
| : Rear speaker | : Signal flow | ||
|
| ||||
|
|
|
| ||
: Sub woofer
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the Dolby Digital recording system with this dynamic realistic sound by connecting the DVD/VCR to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full
Manufactured under license from Dolby Laboratories. “Dolby” “Pro Logic” and the
•Use DVD video discs encoded via the Dolby Digital recording system.
Amplifier equipped with a |
|
|
Dolby Digital decoder |
|
|
To COAXIAL |
|
|
type digital |
| To COAXIAL DIGITAL |
audio input |
| |
75 | Ω coaxial cable (not supplied) | AUDIO OUT |
|
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital decoder.” Refer to that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.
With an amplifier not equipped with Dolby Digital |
| |
Connect the equipment as follows. | * Connect one or two rear speakers. | |
• This connection is only suitable for Video CDs and | ||
Audio CDs. |
| The output sound from the rear |
* |
| speakers will be monaural even if you |
Amplifier equipped with | connect two rear speakers. | |
| Dolby Surround Pro Logic |
|
To audio input |
| To ANALOG |
Audio cable (not supplied) | AUDIO OUT |
|
Connecting to an amplifier equipped with a DTS decoder
Digital Theater Systems (DTS) | “DTS” and “DTS Digital Out” are | |
DTS is a high quality surround technology used in theaters and now available for home use, | ||
registered trademarks of Digital Theater | ||
on DVD video discs or audio CDs. | ||
Systems, Inc. | ||
If you have a DTS decoder or processor, you can obtain the full | ||
| ||
benefit of 5.1 channel DTS encoded sound tracks on DVD | • Use DVD video discs or | |
video discs or audio CDs. | ||
audio CDs encoded via the | ||
Amplifier equipped with a | ||
DTS recording system. | ||
DTS decoder |
| |
To COAXIAL |
| |
type digital | To COAXIAL DIGITAL | |
audio input | ||
AUDIO OUT | ||
75 Ω coaxial cable (not supplied) |
20
2H20101A | 20 | 2/10/05, 7:32 PM |
