Other functions (VCR)
Duplicating a video tape
If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power.
VCR DVD INPUT SELECT
STOP
SP/SLP
REC/OTR
Duplicating a video tape
Preparation:
•Turn ON the TV and select the corresponding video input.
•Press VCR DVD selector to select the VCR mode. (The VCR indicator will light.)
•Load a cassette tape with the erase prevention tab intact.
•Load a previously recorded tape into the playback VCR or Camcorder.
1Press SP/SLP to select the desired tape speed SP or SLP.
It is recommended that you set the tape speed to the SP mode on the recording VCR for best results.
2Press INPUT SELECT once or twice to select AUDIO/VIDEO input position.
“L1” or “L2” will appear in the display.
L1: on the rear panel
L2: on the front panel
Connection with second VCR
Playback VCR
To VIDEO OUT 
To AUDIO (R) OUT To AUDIO (L) OUT
AUDIO/VIDEO cable (supplied)
Recording VCR
To VIDEO IN | To AUDIO (R) IN |
| To AUDIO (L) IN |
Connection with Camcorder
3 Press PLAY on the playback VCR or Camcorder. |
| Playback Camcorder | |
| To AV Jack | ||
4 | Press REC/OTR on the recording VCR. |
| Recording VCR |
The duplicating process begins. |
|
| |
|
|
| To AUDIO (R) IN |
|
|
| To AUDIO (L) IN |
5 |
| To VIDEO IN | AUDIO/VIDEO cable (not supplied) |
Press STOP after duplicating a video tape. | For duplicating a previously recorded tape from a | ||
| |||
| camcorder, follow the camcorder manufacturer’s | ||
instructions. A typical camcorder dubbing hookup is shown above.
40
2H20101A | 40 | 2/10/05, 7:33 PM |
