Gefen EXT-HDMI1.3-CAT6-4X user manual Connecting and Operating 4X CAT6 Extender for Hdmi

CONNECTING AND OPERATING THE

4X CAT6 EXTENDER FOR HDMI

How to Operate the 4x CAT6 Extender for HDMI

(using an 4x4 Matrix)

The front panel of each Receiver unit for the 4x CAT6 Extender for HDMI

contains a set of LED indicators which corresponds to an input (source) on the 4x4 Matrix device. A blue LED indicates which input has been routed from the 4x4 Matrix. On the top of each Receiver unit there are a set of 4 push-buttons which are used to control the switching of the 4x4 Matrix.

Example 1: Routing Input (source) 3 to Output (display) 4.

1.Connect an HDMI cable from HDMI Out 4 on the 4x4 Matrix to HDMI In 4 on the 4x CAT6 Extender for HDMI Sender unit.

2.Connect an 4x CAT6 Extender Receiver unit to Display 4.

3. Press button 3 on the top of the Receiver unit. Button 3 is shown below. The In 3 LED will turn bright blue, indicating that Input 3 on the 4x4 Matrix has been routed to Display 4 (Zone 4).

HDMI cable To Display 4

CAT-6 from

Button 3Out 4 on

Extender

In 3

Example: HDMI input 3 is routed to HDMI Out 4 (a picture of the 4x4 Matrix display panel is shown below). The image shown on Display 4 will be the HDMI source (3) connected to the 4x4 Matrix.

Input 3

12