Firmware Update | Gefen EXT-HDMI1.3-CAT6-4X guide

FIRMWARE UPDATE

11.Connect the RS-232 cable to the Receiver unit.

12.Repeat steps 4 - 7 and upload RHDMIDCAT6x4_e_x_x.bin.

13.Repeat step 11 - 13 for each Receiver unit.

31

Image 34

Gefen EXT-HDMI1.3-CAT6-4X user manual Firmware Update

Contents

4x CAT6 Extender For Hdmi Technical Support Hours Asking for AssistanceTechnical Support Write To Contents Gefen 4x CAT6 Extender for Hdmi IntroductionGefen How It Works Operation Notes Features FeaturesSupported Hdmi 1.3 Features Package Includes Sender Panel Layout Sender Panel Descriptions CAT6 Output Jack Receiver Panel Layout Receiver Panel Descriptions Control Buttons IR Remote Description RMT-4-IR Remote Optional RMT-4-IR Remote Installation Installing the RMT-4-IR Battery RMT-4-IR Remote Configuration Setting the IR Remote Channel on the RMT-4-IR Connecting the 4X CAT6 Extender for Hdmi How to Connect the 4x CAT6 Extender for Hdmi Matrix Mode Connecting and Operating 4X CAT6 Extender for Hdmi Example 1 Routing Input source 3 to Output display Connecting and Operating the 4X CAT6 Extender for Hdmi Connecting and Operating the 4X CAT6 Extender for Hdmi RMT-4-IR Button Source Hdmi cable To Display CAT6 Out From Extender Connecting and Operating the 4X CAT6 Extender for Hdmi Default settings for DIP switches DIP Switch ConfigurationDIP Switch Location Matrix Mode / Stand-alone Mode Receiver Unit bottom DIP 2 Deep Color DIP 3 / DIP 4 IR Remote Channel RS-232 Serial Control Interface RS-232 SettingsBinary Table Routing Sources using RS-232 Receiver Unit Matrix Mode Use the RS-232 controller to send the following command Command RS-232 Serial CommandsFunctions Syntax Fiber Optic Extender Status F0 Command #LOCKPOWER Function #RMTIRADD Function IP Control View Matrix Status IP Configuration Backup / Restore Power Management Network Cable Wiring Diagram Pin Color Firmware Update Firmware Update Procedure Firmware Update Specifications Warranty Product Registration Licensing Page Rev C3 Nordhoff St., Chatsworth CA