Gefen EXT-HDMI1.3-CAT6-4X user manual Sender Panel Descriptions, CAT6 Output Jack

SENDER PANEL DESCRIPTIONS

1Standby Button

Sets the 4x CAT6 Extender for HDMI into Standby Mode.

2IR Sensor

Receives signals from the IR Remote Control.

3Power Indicator

This LED will turn bright red once the locking power supply has been properly connected.

4IR Blaster (4)

Used to connect the IR Blaster to the Source device.

5CAT6 Output Jack (4)

Connects the Sender unit to the Receiver unit using CAT-6.

6RS-232 Serial Port (Input)

The 4x4 Matrix may be switched remotely using serial communications with any office computer or a control automation device by connecting to this port. Please see page 20 for details.

7Locking HDMI Port (4)

Connect a HI-Def source to this HDMI port.

8IP Control

Connect to this port to control the 4x CAT6 Extender for HDMI using IP Control. See page 25 for more information.

9RS-232 Serial Port (Output)

Connects to the RS-232 control device. The 4x4 may be switched remotely using this port. See page 20 for details.

1024V DC Power Connector

Connects the included 24V DC power supply to this receptacle.

5