SD-W1101 DVD-RAM
with REALmagic Hollywood+ Playback Card
Installation InstructionsCongratulations on your purchase of a Toshiba SD-W1101 DVD-RAM
drive and REALmagic Hollywood+ DVD/MPEG-2 Playback Card Kit.
The following information will help you in the simple installation of
your new DVD-RAM. If you are not replacing a presently installed SCSI
CD-ROM with the enclosed DVD-RAM, additional installation hardware
may be required. Refer to REALmagic Hollywood+ User’s Guide for
installation instructions on the DVD/MPEG-2 Playback Card.
CHECKING YOUR KIT PACKAGING
Please unpack your DVD kit, and assure that you have the following
items:
lDVD/MPEG-2 PCI Playback Card (compatible with all graphics cards)
l13” 3.5mm ext. audio cable
l14” HDB15 - 9 DIN overlay cable
lS-Video to RCA video converter cable
lREALmagic™ Accessory Kit envelope
(with software, demo CD and Playback Card User’s Guide)
Additional items you may need that are not included in the kit are:
lScrewdriver
lmounting screws and mounting hardware
lSCSI interface cable
lSCSI host adapter board
lDVD/CD-ROM Sound Cable
SYSTEM REQUIREMENT
The DVD-RAM kit requires the following:
✔2MB of free hard disk space
✔16MB of RAM
✔Pentium-based PC (or compatible), 133MHz or higher
✔PCI 2.1 compliant expansion slot
✔VGA Card
✔Plug and Play BIOS support
✔Microsoft™ Windows 95 or higher
✔Amplified stereo speakers
1
1101kit.p65 2/10/99, 3:47 PM1