Toshiba installation instructions SD-W1101 Connection ONE Drive

Daisy-Chaining- If the DVD-RAM you are installing is one of two or more SCSI devices you are connecting to your system, you will need to use a custom built SCSI interface cable. Remember that the terminator jumper on the DVD-RAM drive must have the jumper installed when the drive is the last device in the chain.

Host Computer

			Interface
I/F Card	SCSI Cable	Connector
				DVD-RAM
				DRIVE
Terminator				(see note 1)

SD-W1101 CONNECTION (ONE DRIVE)

Host Computer

I/F Card

Terminator

SCSI Cable

SD-W1101

INTERNAL DRIVE(S) Interface Connector

DVD-RAM

DRIVE #1

(see note 2)

If connecting more than three SCSI devices, you need to use a custom built SCSI Interface Cable.

DVD-RAM

DRIVE

#2

(see note 2)

DVD-RAM

DRIVE

#N

(N < 7)

Install Terminator Jumper

only on the last drive of BUS

(see note 1)

SD-W1101 DAISY-CHAIN CONNECTION (MULTIPLE DRIVES)

Notes:

1.Terminator jumper must be jumpered when DVD-RAM is the last or only device on the SCSI BUS.

2.Terminator jumper should be removed when DVD is in a "daisy-chain" and is NOT the last drive.

Power Cable - Connect an in- ternal computer power sup- ply cable to the power socket at the back of the DVD-RAM. One side of the plug has chamfered edges, so the power connector fits only one way. Push plug completely into the socket making sure the plug fits correctly.

4