Toshiba SD5700 manual Pho

3)Select "Test Tone" and press the ENTER button.

The DVD player outputs a test signal to each speaker when it is in stop mode. When playing a DVD video disc, it substitutes the current

sound for the test signal.

Move the cursor control (< / I_) to select the receiving speakers, and adjust the volume of each speaker at the same level by moving the cursor control (A / V).

If all the volume levels cannot be equalized, adjust them on the amplifier.

Note

Depending on the disc, 6 channel sounds may not be output via the 5.! CH SURROUND AUDIO OUT jacks.

Off: Full dynamic range is maintained.

On: Dynamic range is reduced.

Notes

•This function works only during playback of Dolby Digital recorded discs.

•The level of Dynamic Range Reduction may differ depending on the DVD disc.

Off: The primary vocal is not output.

On: The primary vocal is output when it is recorded on the disc.

Notes

•The vocal output feature is used during playback of

Dolby Digital (multi-channel) recorded DVD KARAOKE discs. This feature allows you to turn off vocal audio tracks, or restore them for background accompaniment.

•When playing KARAOKE, connect appropriate audio equipment such as an amplifier to the DVD player.

HDCD enhances the output sound level of audio CD by approximately 6 dB. As such, distortion may occur in some connected products that are unable to compensate for a wide range of input signal levels. (e.g. TV, stereo receivers)

Off: For normal use.

On: Select when an HDCD sound is distorted. Sound volume of an HDCD is lessened.

Language

p_HO

D;scMenu LaaguageENG

Aud;oLaaguage ENG subtitleLaaguage - - -

English: To view on-screen displays in English. Fran£ais:To view on-screen displays in French. EspaSol: To view on-screen displays in Spanish.

English:	To display	disc	menus	in English.
French:	To display	disc	menus	in French.	"11
Spanish:	To display	disc	menus	in Spanish.
Others:	To make a further choice.

After pressing the ENTER button, follow steps 1) - 4) below.

1)Obtain the abbreviation of the preferred language from the list [_.

2)Select the first character by moving the cursor control (A / V).

3)Move the cursor control (< / I_) to shift and select the second character by moving the cursor control (A / V).

Laaguoge

On-Screen_nguage ENG

m_mmt_ag,+,me r_n_h

AudioLanguage ENG S_nish

SubtitleLanguage ---

4) Press the ENTER button.

Note

Some DVD video discs may not include your pre-

selected language. In this case, the DVD player automatically displays disc menus consistent with the

disc's initial language setting.