Toshiba SDP63SWE owner manual Digital Out Analog 2ch

CAUTION

•When you are connecting (via the BITSTREAM/PCM jack) an AV decoder that does not have Dolby Digital, DTS or MPEG2 decoding function, be sure to set

“Digital Out” to “PCM” from the on-screen displays 58 .

Otherwise, high volume sound may damage your hearing as well as the speakers.

Connecting to an audio system equipped

with analog audio inputs

Signal flow

•When playing DTS-encoded discs (audio CDs), excessive noise may be output from the analog audio output jacks. To avoid possible damage to the audio system, you should take proper precautions when the analog audio output jacks of the player are connected to an amplification system. To enjoy DTS Digital Surround® playback, an external 5.1 channel DTS Digital Surround® decoder system must be connected to the BITSTREAM/ PCM jack of the player.

To AV OUT

Audio/video cable (supplied)

To analog audio inputs

Red (Right) AUDIO IN	Audio system
R
L
White (Left)
Yellow (Video)
No need to connect.

Note

•DO NOT connect the BITSTREAM/PCM jack of the player to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the BITSTREAM/PCM jack of the player.

Make the following setting.

Setting	Select:	Page
“Digital Out”	“Analog 2ch”	58

Connections

65

SDP63SWE_E_53-76.indd 65

2009/02/02 16:21:49