12. TOTAL OPERATION PROCEDURES
When the control lock is set to the “X” or “Z” position, it is available to issue READ or RESET reports. Both kinds of reports can be issued on labels or report paper.
Control lock: X or Z
“X” position: READ
The totals will not be cleared as they are printed on labels or report paper. “Z” position: RESET
The totals will be cleared as they are printed on labels or report paper.
REPORTS READ
HOURLY REPORT | 1 |
The labels of hourly report are issued consecutively.
1 WRtY’REBRT
(Sample labels)
1
HOURLYREPORT lifa
Mwt84 aG25&
STlliEl31 1743
lm alM YIMT mL!B!5
I r, 5.9
h22 265.15 721.21
(Sample report)
- 36 -