14
Using the Projector
Using the Keypad and Remote Buttons
While the menus are displayed, the SOURCE and RESYNC buttons
on the keypad become INCREMENT and DECREMENT buttons and
the MENU button becomes a SELECT button. See “Using the On-
Screen Menus” on page16 for details.
FIGURE 11
Keypad and remote buttons
MENU
NOTE: If you have turned Auto
Source off (page 22), you may
need to press the source button
more than once to display an
active source. The sources switch
in this order: data analog, data
digital, S-video, and composite
video.
Press the MENU button to open the on-screen menus. Press MENU
again (while Exit is highlighted) to close the menus. (The menus
automatically close after 30 seconds if no buttons are pressed.)
When you close the menus, the projector saves any changes you
made. For more information about the on-screen menus, see
page 16.
SOURCE
When you have more than one source (computer and video) con-
nected to the projector, select between them by pressing the
SOURCE button on the keypad or remote.
ON
MENU
SELECT INCREMENT DECREMENT
SOURCE RESYNC
LED
KEYSTONE+ MENU
KEYSTONE- SOURCE