18
Using the Projector
Contrast
The contrast controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
1Highlight Contrast, press SELECT
, use the INCREMENT and
DECREMENT buttons to adjust the contrast, then press SELECT
to accept your changes.
Tint
NOTE: The color setting applies
to video sources only. The tint
setting applies to NTSC video
sources only.
The tint adjusts the red-green color balance in the projected
image.
1Highlight Tint, press SELECT, use the INCREMENT and DECRE-
MENT buttons to adjust the tint, then press SELECT to accept
your changes.
Color
The color setting adjusts a video image from black and white to
fully saturated color.
1Highlight Color, press SELECT, use the INCREMENT and DECRE-
MENT buttons to adjust the color, then press SELECT to accept
your changes.
Blank screen
Blank Screen determines what color is displayed when there is no
active source and when the projector is in standby.
1Highlight Blank screen, press SELECT
, use the INCREMENT and
DECREMENT buttons to cycle through the options blue, black,
and white, then press SELECT.