34
Using the menus (continued)Image adjustment menu
Use this menu to set or adjust image-related items. Items that can be set or adjusted are
marked with “Yes”, and those that cannot are marked with “No”. (When an item is masked,
it indicates that you cannot select for the current input.)
*1: [Tint] can be displayed and adjusted only when the video signal is [NTSC] or
[NTSC4.43].
Item Description
Computer (D-SUB)
Video USB
RGB Y/PB/PR
Volume Decrease or increase the Volume with .Yes Yes Yes Yes
Picture mode Press . Toggle the picture mode with .
Bright/Standard/True color
Yes Yes Yes Yes
Keystone Correct the keystone (trapezoid) distortion of the
screen.
Screen shrinking Screen shrinking
at bottom at top
Yes Yes Yes Yes
Brightness Adjust the brightness of the image.
Darker Brighter
Yes Yes Yes Yes
Contrast Adjust the image contrast.
Lower Higher
Yes Yes Yes Yes
Color Adjust the color of the image.
Lighter Deeper
No Yes Yes No
Tint Adjust the image to an appropriate tint.
Reddish Greenish
No Yes Yes No
Sharpness Adjust the sharpness of the image.
Softer Sharper
No Yes Yes No
H-position Adjust the horizontal position of the image.
Move left Move right
Yes No N o No
V-position Adjust the vertical position of the image.
Move down Move up
Yes No N o No
Phase Adjust with to eliminate flicker. Yes No N o No
Frequency Adjust with to eliminate periodic patterns
and flickering when many vertical lines appear
on the screen.
Yes No N o No