(Supplied) Power cord connector

Connection

Before connection

Read the owner’s manual of the device you are connecting to the projector.

Some types of computer cannot be used or connected to this projector. Check for an RGB output terminal, supported signal p.41 , etc.

Turn off the power of both devices before connecting.

The figure below is a sample connection. This does not mean that all of these devices can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)

 

 

Computer

 

 

 

(for control)

 

 

Audio amplifier, etc.

 

 

 

 

 

 

Video recorder,

 

 

 

DVD player, etc.

To audio input

To RS-232C terminal

p.43

To audio output

To S-Video

White (L)/Red (R)

 

White (L)/Red (R)

output

Turning the power on and off

Connecting the power cord

1 Insert the power cord connector into the AC IN socket of the projector.

2 Insert the power cord plug into a wall or other power outlet.

Removing the lens cover

Be sure to remove the lens cover when the power is turned on. If it is left on, it could become deformed due to heat.

Audio cable

Control cable

Video cable

 

 

(not supplied)

S-Video cable

(not supplied)

 

 

 

 

(not supplied)

 

 

 

CONTROL

 

S-VIDEO

 

MONITOR

AUDIO OUT

 

 

 

 

 

 

R

L

VIDEO

 

COMPUTER 2 IN

COMPUTER 1 IN

 

 

 

( Y/PB/PR )

AUDIO IN

( Y/PB/PR )

 

 

Turning the power on

1 Turn on the main power switch

The ON indicator will change to orange, indicating standby mode.

TEMP

LAMPFAN

(Orange)

Operations

2 Press the ON/STANDBY button.

 

Remote

 

Control panel

Control

Start-up screen

 

 

 

 

 

 

RGB cable

 

 

 

 

 

 

 

(not supplied)

 

 

 

To RGB

 

 

 

 

Audio cable

output

 

 

 

Audio cable

(not supplied)

 

 

 

 

To audio

 

 

 

 

(not supplied)

 

 

 

 

output

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To audio output

Computer

Computer

 

To audio

AV cable

 

(not supplied)

 

output

 

 

 

 

 

White (L)/

To video

 

Red (R)

 

 

 

output

 

 

 

RGB cable

 

VCR

(supplied)

 

 

Monitor cable Mini D-sub

To RGB

 

 

15P-BNC

 

output

 

 

 

(not supplied)

 

To Y/CB/CR output

Green (Y)/Blue (CB)/Red (CR)

Conversion adapter BNC-pin (not supplied)

DVD video recorder, etc.

The power turns on, and the following 3 green indicators light: ON, LAMP, and FAN. After a moment, the start-up screen appears.

CAUTION

Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your eyes or sight.

Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.

Do not place your hands, face, or other objects near the air exhaust. Doing so could cause burns, deform/break the object.

Notes

COMPUTER terminals 1 and 2 function identically.

The AUDIO IN terminal doubles for devices connected to COMPUTER terminals 1 and 2.

22

23

Page 12
Image 12
Toshiba TDP-T30 owner manual Connection, Turning the power on and off, Operations