![](/images/new-backgrounds/1265063/26506319x1.webp)
Connection
Before connection
•Read the owner’s manual of the device to be connected to the projector.
•Some types of computer cannot be used connected to this projector. Check for an RGB output terminal, supported signal p.36 , etc.
•Turn off the power of both devices before connection.
•The figure below is a sample connection. This does not mean that all of these devices can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)
Turning the power on and off
Connecting the power cord
1 Insert the power cord connector into the AC IN socket of the projector. 2 Insert the power cord plug into a wall or other power outlet.
When the power cord is plugged in, the following three |
green indicators will come on for several seconds: ON, |
TEMP, and LAMP. Next, the ON indicator will change to |
orange, indicating standby mode. |
(Do not perform any operations while the 3 green |
CRT monitor, etc.
Computer
(Supplied) Power cord connector | indicators are lit.) |
Removing the lens cover
| To audio output | |
| To RGB | |
Audio cable | output | |
| ||
(for computer) | RGB cable | |
(supplied) | ||
(supplied) | ||
|
Be sure to remove the lens cover when the power is turned on. If it is left on, it could become deformed due to heat.
CONTROL AUDIO | VIDEO | MONITOR | COMPUTER |
VIDEO |
| ( Y/PB/PR ) |
Monitor cable |
Mini |
(not supplied) |
Audio cable |
(supplied) |
■Turning the power on
Press the ON/STANDBY button.
The power turns on, and the following 3 green indicators light: ON, LAMP, and FAN. After a moment, the
Control panel
FAN TEMP LAMP ON
INPUT | ON / STANDBY |
| MENU |
VOL. - | VOL. + |
AUTO |
|
KEYSTONE | AUTO SET |
Remote Control
| ON/ |
CALL | STANDBY |
KEYSTONE AUTO | SET |
MUTE | FREEZE |
RESIZE
RESIZE
OFF
INPUT
Operations
Control cable | To Y/CB/CR | ||||
output | |||||
|
| (not supplied) | |||
|
| Green (Y) | |||
| Yellow |
|
| ||
| Video cable | Blue (CB), | |||
| (to video output) | Red (CR) | |||
p.38 | (supplied) | ||||
To audio |
| ||||
|
| To audio | Conversion adapter | ||
To |
| ||||
To | output | ||||
| White (L) | White (L) | |||
| Red (R) | output | Red (R) | (not supplied) |
Computer (for control) | VCR | DVD player |
Note
• The AUDIO terminal is common among all the devices for input terminal.
CAUTION
•Do not look into the lens during operation. Doing so could damage your vision.
•Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.
•Do not place your hands, face, or other objects near the air exhaust. Doing so could cause burns, deform/break the object.
Notes
•The
•The first time you use the projector after purchase, after the
18 | 19 |