Toshiba TLP-T50M owner manual Using the menu, Image adjustment menu, Default setting menu

Using the menu (Continued)

■The image adjustment menu

Use this menu to adjust image-related items.

Items Items that can be adjusted are marked with “Yes”, and those that cannot are marked with “No”.

Item	Description		Computer	Y/PB/PR	Video	S-video
Contrast	Lower	Higher	Yes	Yes	Yes	Yes
Brightness	Darker	Brighter	Yes	Yes	Yes	Yes
Color	Lighter	Deeper	No	Yes	Yes	Yes
Tint [Note 1]	Reddish	Greenish	No	No	Yes	Yes
Sharpness	Softer	Sharper	No	Yes	Yes	Yes
R-level	Less red	More red	Yes	Yes	Yes	Yes
G-level	Less green	More green	Yes	Yes	Yes	Yes
B-level	Less blue	More blue	Yes	Yes	Yes	Yes
Up/down shift [Note 2]	Shift down	Shift up	No	Yes	Yes	Yes

Notes

1:Tint can only be adjusted when Video mode p.23 is NTSC or NTSC4.43.

2:Up/down shift can only be adjusted when Screen size p.29 is Wide.

■The default setting menu

This menu shows placement status and other settings.

Item		Description
Projection	Set projection mode in accordance with Placement Style p.17
mode	(Placed	(Rear)	(Hung from		(Back hung
	on floor)		ceiling)		from ceiling)
No signal	Set the time to wait after signal input stops until turning off the power:
power off	Off (not turned off)	1 min	2 min	...	60 min
Power on	Set whether to turn on the power when the ON/STANDBY button is pressed
	(Manual), or when the power cord is plugged in (Auto).			Manual	Auto
Lamp power [Note 1]	Set the lamp power		Standard		Low

Note

1:When lamp power is set to low, the screen becomes a little darker, but the cooling fan noise gets quieter. This setting will be cleared when you turn the power off. The setting will be back to “Standard” when the power is turned on next time.

Notes

•Note that if Power on is set to Auto, then if the power cord is plugged in when power is restored after a power outage, the projector power will come on.

•Even if Power on is set to Auto, press the ON/STANDBY button to turn off the power. Unplugging the power cord to cut off the power will shorten the life of the lamp.

■The display setting menu

Use this menu to set screen display-related items.

Item		Description
Screen size
	(Full): Display with LCD panel’s resolution
	(Thru): Display with sampling resolution (for computer input)
	(Wide): Wide-screen display (for Video, S-video, and Y/PB/PR)
Language	Select one of the languages below to use for displaying menus and messages
	[ : Enter setting mode] [		:Selection]		[Apply:		]
	English/Français/Deutsch/Italiano/Español/
	Português/	/	/	/
Background	Screen to display when there is no input signal		(Logo)			(Blue)	(None)
Icon	Display icons as function guides				On		Off
Start-up screen	Display start-up screen when power turned on				On		Off

Note

• If “Thru” is selected for screen size, portions exceeding the pixel count of the LCD panel p.35 will not appear on the screen. Note that for RGB signals with clock speeds SXGA3_60 p.36 or lower, all input pixel signals are sampled. (This effect is noticeable when the screen is enlarged using the Resize function p.36 ). However, if the clock speed is higher than this, the RGB pixel signal is thinned before sampling.

■Reset menu (Special menu)

This menu is displayed when other menus are not displayed, and the button is held down until the menu appears.

•When the screen is placed vertically, and Auto keystone correction is executed, but the keystone correction is not successful, stow the foot adjuster in its original position, place the projector on a flat surface, select Horizontal reference value reset, and press the button.

•Select Reset All and press the button to return all menu items to the factory settings.

Item		Description
Horizontal reference	Reset the horizontal reference value for Auto keystone correction
value reset	[	: Enter execution mode]	[Yes	No]	[Apply:	]
Reset all	Reset all menu items to their factory settings
	[	: Enter execution mode]	[Yes	No]	[Apply:	]

Operations

28 29