59
Setting up your TV

Viewing the system status

3Open the System Status menu, highlight System
Information, and then press the ENTER button.
4Press the ( / arrow) buttons to scroll through the menu bar
to select Factory Defa ults or Support Information.
The related information appears.
To close the screen and return to the Installation menu:
❖Highlight Done in the Support Information screen, and then
press the ENTER button.
To return to normal viewing, press the EXIT button.
Resetting Factory Defaults
To reset all settings and channels to their factory default values:
1Press the MENU button and open the Setup menu.
2Highlight Installation, and then press the ENTER button.
A new set of Installation menu icons appears.
3Open the System Status menu, highlight System
Information, and then press the ENTER button.
4Press the ( / arrow) buttons to scroll through the menu bar
to select Factory Defa ults.
5Highlight Yes , and then press the ENTER button.
6If a PIN code has been set, enter your PIN code.
7Press the ( / arrow) buttons to select Done, and then press
the ENTER button.
A warning message appears.
8Select Yes , and then press the ENTER button.
The TV turns off automatically after a few seconds.
9After the TV turns off, unplug the TV power cord and then
plug it in again to complete the reset process.
To cancel the reset process, select No, and press the ENTER button
in step 5 above.