5. INSTALLATION PROCEDURE

EO1-13027

5.2 Connecting the Drawer

5.2 Connecting the Drawer

1)Turn the printer power OFF.

2)Connect the drawer cable to the drawer interface connector in the correct orientation.

[Drawer interface connector] (6-pin modular connector)

A Drawer cable which connects the printer to a drawer is connected to this connector.

To this connector, a TOSHIBA drawer can be connected. Do not connect anything other than the connectable drawer.

NOTE: For connectable drawers, refer to your nearest authroized TOSHIBA TEC representative.

[Ground terminal] (6-pin modular connector)

The drawer interface cable’s ground wire is secured to this terminal.

5-4

Page 23
Image 23
Toshiba TRST-A00, TRSTA00UCQMR owner manual Connecting the Drawer, Drawer interface connector 6-pin modular connector