3. APPEARANCE
|
| ||
|
| 3. 2 LED and Feed Button | |
|
|
|
|
Error Status Table |
|
|
|
Blue LED Blinking (Slow) |
|
|
|
|
|
|
|
Problem | What to Do | Where to Go | |
Receipt paper is low | There are about 4 ½ meters, ± 3 meters, | See “Loading the |
|
| (15 feet, ± 10 feet) of paper left. Change | Receipt Roll” in |
|
| the paper soon to avoid running out of | chapter 5.3. |
|
| paper half way through a transaction. |
|
|
Blue LED Blinking (Fast) |
|
|
|
|
|
|
|
Problem | What to Do | Where to Go | |
Receipt paper is out | Change the paper now. Do not run a | See “Loading the |
|
| transaction without paper as the data | Receipt Roll” in |
|
| may be lost. | chapter 5.3. |
|
Receipt cover is open | Close the cover. The printer will not |
|
|
| operate with the cover open. |
|
|
Knife failure | Open the receipt cover and check the |
|
|
| knife. Clear any jammed paper you can |
|
|
| see. Tear off any excess paper against |
|
|
| the |
|
|
|
|
|
|
NOTE: If other LED status except for the above occurs, turn the power off, and then on. If this does not restore the LED, contact your nearest TOSHIBA TEC representative for assistance.
