Trouble indications | ON | Lit (red) | |
LAMP | Lit (red) | ||
| |||
| TEMP | – |
|
|
|
| 40 |
|
|
| ||
|
| |||
ON | Lit (red) | |||
LAMP | – | |||
TEMP | Flashing (red) | |||
|
|
|
|
|
If there is some problem inside the projector, the indicators light up or flash.
| SELECT/ADJUST |
|
|
| ON |
ON/STANDBY MENU | ENTER INPUT | ON Indicator |
LAMP LAMP Indicator
TEMP
TEMP Indicator
The lamp turns off or does not light up.
→The lamp’s end, or malfunction of the unit.
•Lamp’s life length is over, replace the lamp with new one. 42
•Unplug the power cord and call the dealer.
The power turns off or does not come on.
→Trouble with the intake fan.
•Unplug the power cord and call the dealer.
ON | Lit (red) |
LAMP | – |
TEMP | Flashing (orange) |
ON | Off or lit (red) |
LAMP –
TEMP –
The power does not come on.
→Malfunction of the unit.
•Unplug the power cord and call the dealer.
ON | Lit (red) |
LAMP | – |
TEMP | Lit (red) |
The power turns off or does not come on.
→The inside is too hot, or the projector has been working in an area of high temperature.
•Place the projector correctly so the intake and exhaust fans’ holes are not covered.
•Turn the projector off, and leave it for a while, and turn it on again.
•Clean the air filter. 41
The power turns off or does not come on.
→Trouble with the exhaust fan.
•Unplug the power cord and call the dealer.
Note
Before attempting any maintenance, unplug the power cord.