Others

(Continued)

Image does not appear when using the document imaging camera.

•The wrong input is selected.

→Select the correct input source. 37

Image is out of focus or not clear when using the document imaging camera.

•The camera lens is dirty.

→Clean the camera lens.

Use a lens cleaner to clean the lens. 41

•The document imaging camera is out of focus.

→Focus the document imaging camera.

38

•Focus between main unit and screen is not correct.

→Focus the picture by turning the focusing ring. 21

•The light is not on.

The image may not be projected clearly if the light is not on.

→Turn on the light. 37

The remote control does not work.

•The remote control is not facing the remote sensor.

→Face the remote control transmitter

toward the remote sensor on the projector. 15

•The remote control is too far.

→Operate within about 5 meters. 15

•There is an obstruction between the remote control and the remote sensor.

→Remove the obstacle.

•The batteries are exhausted.

→Replace the batteries. 14

•The operating mode of the remote control is not set correctly.

→Set the POINTER/PJ selector

according to the equipment you want to control. 13