AC power
If you have trouble turning on the computer with the AC adaptor connected you should check the status of the DC IN/Battery indicator. Please refer to the Monitoring of power condition section for further information.
Problem | Procedure |
AC adaptor doesn’t | Check the connections to make sure that the |
power the computer | power cord/adaptor is firmly connected to the |
| computer and a working power outlet. |
| Check the condition of the cord and terminals. If |
| the cord is frayed or damaged it should be |
| replaced, while if the terminals are soiled, they |
| should be cleaned with a clean cotton cloth. |
| If the AC adaptor still does not power the |
| computer, you should contact TOSHIBA Support. |
|
|
Battery
If you suspect a problem with the battery, you should check the status of the DC IN/Battery indicator.
Problem | Procedure |
Battery doesn’t | The battery may be discharged - connect the AC |
power the computer | adaptor to recharge the battery. |
|
|
Battery doesn’t | If the battery is completely discharged, it will not |
charge when the AC | begin charging immediately, in these instances you |
adaptor is attached | should wait a few minutes before trying again. If |
| the battery still does not charge, you should check |
| that the power outlet the AC adaptor is connected |
| to its supplying power - this can be tested by |
| plugging another appliance into it. |
Battery doesn’t power the computer as long as expected
If you frequently recharge a partially charged battery, the battery might not charge to its full potential - in these instances you should fully discharge the battery and then attempt to charge it again.
Check the Power saver option under Select a power plan in the Power Options.
User's Manual |