Disabled | Enables Sleep and Charge function only when |
| the AC adaptor is connected. |
Lower limit of | Specifies the lower limit of remaining battery life |
remaining battery life by moving the slider bar. If the remaining battery life falls below the setting, the Sleep and Charge function will be stopped.
This setting is only available when the Function under Battery Mode is enabled.
CPU
This function allows you to set the processor's operating mode.
Dynamic CPU Frequency Mode
This option allows you to configure the power saving modes associated with the processor - the following settings are available:
Dynamically | The processor's automatic clock speed switching |
Switchable | function is enabled - in use the processor's |
| operation is automatically switched when |
| necessary. |
|
|
Always High | The processor's automatic clock speed switching |
| function is disabled - in use the processor will |
| always run at its highest level of power |
| consumption and its highest speed. |
Always Low | The processor's automatic clock speed switching |
| function is disabled - in use the processor will |
| always run at a lower level of power consumption |
| and a low speed. |
|
|
Boot
This tab allows you to modify the boot settings.
Boot Priority Options
This option allows you to set the priority for booting the computer. Click the Up and Down buttons to adjust the priority.
To change the boot drive, follow the steps below.
1.Hold down F12 and boot the computer. Release the F12 key one second after the computer is power on.
2.Use the up and down cursor keys to select the boot device you want and press ENTER.
If your computer does not load the Boot menu, please refer to the Troubleshooting section.
User's Manual |