PREPARATION
Storing Channels on the VCR
This section is required if you receive only normal TV or unscrambled cable channels
Incoming Antenna/Cable(CATV) Signals
The VCR scans through all receivable TV and CATV channels and stores only the active ones in your area into the memory. Once the storing is finished, you can select a desired channel using CH/TRK.
Preparation
•Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video connection (page 11).
•Press I.SELECT so that the channel number will appear if “L1” or “L2” is displayed in the VCR display.
VCR TV
POWER
Incoming Antenna/Cable(CATV) Signals
1 Press PROG. to display the MENU screen.
1 | 2 | 3 |
|
|
| CH/TRK | Number |
4 | 5 | 6 | |
7 | 8 | 9 | buttons |
I.SELECT |
| TV VOL | 100 |
| 0 | 100 | |
DISPLAY | REMAIN/ | COUNT RESET TV/VCR | |
COUNTER | I. SELECT | ||
SP/SLP | REC | TIMER |
REW
| PLAY |
|
|
| PLAY, STOP |
REW | CURSOR | FF |
| FF | |
|
|
2 Select “PRESET” using FF or REW, and press ENTER.
CLOCK SET |
|
CH MEMORY |
|
EnD : PROG | ENTER |
SLOW | PAUSE/STILL |
STOP | |
| 1,6 |
PROG. CANCEL | ENTER |
A.SELECT | ENTER |
EJECT | CM SKIP |
3 Select “CH MEMORY” using PLAY |
|
|
or STOP, and press ENTER. |
|
|
TV/CATV | TV | CATV |
AUTO SCAn |
| OFF |
| On | |
ADD CH |
|
| - - | CH | |
ERASE CH |
|
|
| - - | CH |
|
|
| |||
|
|
|
|
|
|
4 Set “TV/CATV“to “TV” or “CATV” using FF or REW.
TV: To store channels received via the antenna.
CATV: To store channels received via the incoming cable.
5 Select “AUTO SCAN” using PLAY or STOP, and press FF to set to “ON”.
The VCR starts scanning and the channels are stored in the VCR in ascending order. When the scanning is finished, the screen automatically returns.
AUTO SCAn | 2 CH | on |
6 Press PROG. twice to exit.
16
