![](/images/new-backgrounds/1313241/31324153x1.webp)
Confirming the timer programs
Press PROG. during timer recording mode. The screen for confirming will appear.
P | P |
M | M |
Press PROG. again to exit from confirmation page.
Changing/cancelling the timer programs
1)If the TIMER indicator is lit , press both TIMER to turn it off and then turn the VCR on by pressing VCR POWER.
2)With steps 2 to 9, change the items.
To cancel a program, select the program you want to cancel in step 4, and press CANCEL. The line is then cleared.
3)Press both TIMER to return to the timer standby mode .
Error indication
The
––a cassette is not loaded.
––the loaded cassette has no safety tab.
––timer recording is in progress.
In these cases, a recording can not be made.
To cancel the Timer Recording
By pressing the POWER button on the front panel of the VCR, it will cancel the timer recording and go to standby.
If a power failure occurs during the timer program recording
•When a power failure has occurred, the programmed contents are not affected, reset the clock.
Overlaps of the programs
If two timer programs overlap, the recording start time of program 1 has priority over the recording off time of program2.
Program 1 |
|
(Start time) | Program 2 |
| |
| (Start time) |
| Overlapped portion |
| (not recorded) |
RECORDING
27