PREPARATION
Initial Settings Using On-screen Display
The language selection and clock setting must be set first when VCR is first plugged in or after it encounters a power failure.
Preparation
•Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video connection (page 11).
•Press VCR to set the remote control operating the VCR.
VCR TV
POWER
1 | 2 | 3 |
|
| CH/TRK |
4 | 5 | 6 |
7 | 8 | 9 |
I.SELECT |
| TV VOL |
| 0 | 100 |
DISPLAY | REMAIN/ | COUNT RESET TV/VCR |
COUNTER | ||
SP/SLP | REC | TIMER |
| PLAY | |
REW |
| FF |
| CURSOR | |
SLOW |
| PAUSE/STILL |
| STOP | |
POWER
VCR
REW
PLAY, STOP
FF
PROG.
Setting the Language
1 Press POWER to turn on the VCR.
2 Press PROG..
The following screen appears on the TV.
PROG. | CANCEL | ENTER |
| A.SELECT |
|
EJECT |
| CM SKIP |
ENTER
3 Select the language using PLAY or STOP and press PROG.
The screen turns to the MENU screen.
MEnU |
4 Press PROG. to return to the normal TV screen.
Optional settings on the SET UP screen
Other optional settings can be made. Press ENTER while “SET UP” is selected on the MENU screen. The screen turns to the SET UP screen.
TAPE LEnGTH | 120 | 160 | 180 |
SAP SET | on |
| off |
COUnTER MEM | on | FRA | off |
LAnGUAGE | EnG | ESP | |
E n D : PROG |
|
|
|
Page 22
Page 28
Page 23
To change the language, move down here and set to the desired one.
To exit, press PROG. once.
14
