Polycom 3725-77601-001H manual Delete a Site, Set Up SIP

Polycom CMA System Operations Guide

Delete a Site

Note

Devices that belonged to a deleted site are automatically reassigned to support

Internet and VPN calls.

To delete a site

1Go to Admin > Dial Plan and Sites > Sites or Admin > Dial Plan and Sites > Site Topology.

2In the Sites list or Site Topology page, select the site of interest and click Delete.

3Click Yes to confirm the deletion.

Set Up SIP

The CMA system supports SIP to establish conference connections. If you want to use SIP, you must enable it and configure SIP settings. You must also upload SIP URI data.

To implement SIP, complete the following tasks

1Configure the SIP settings for each site.

When you add a site to the CMA system, you also set up site provisioning, which includes the SIP settings. Be sure to enable SIP and configure the servers, protocol, and credentials needed for your SIP sever. See “Add a Site” on page 465.

2Import SIP URI data.

After you enable and configure SIP, you must import your endpoint SIP data from your SIP server. The import provides the CMA system with all of the URI data it needs to use SIP.

Note

If you are using Microsoft as your SIP server, you do not need to import SIP URI data. The CMA system can retrieve the SIP URI from the enterprise directory.

476 Polycom, Inc.