Polycom 3725-77601-001H Add an Snmp Notification Receiver, Click Save Snmp Settings, Tcp, Udp

Polycom CMA System SNMP

Setting	Description
Encryption Type	For SNMPv3, specifies the privacy protocol for the
	connection between the CMA system and the SNMP
	agent.
	The CMA system implements communication with
	authentication and privacy (the authPriv security
	level as defined in the USM MIB).
	Possible values for privacy protocol are:
	• DES—Uses a 56 bit key with a 56 bit salt to
	encrypt the SNMPv3 packet.
	• AES—Uses a 128 bit key with a 128 bit salt to
	encrypt the SNMPv3 packet.
Encryption Password	For SNMPv3, specifies the password to be
	associated with the privacy protocol.

4Click Save SNMP Settings.

Add an SNMP Notification Receiver

You can configure the CMA system to send SNMP messages to different notification receivers (e.g., a network management system).

To add an SNMP notification receiver to a CMA system

1Go to Admin > SNMP Settings.

2In the Notification RCVR Actions section, click Add.

3Configure these settings in the New Notification Receiver dialog box.

Setting	Description
IP Address	Specifies the IP address of the host receiver.
Transport	Specifies the transport protocol for SNMP
	communications to the host receiver. Possible values
	are:
	•	TCP
	•	UDP
	Select the transport protocol for which the host
	receiver is configured.
Port	Specifies the port that the CMA system will use to
	send notifications. By default, the CMA system uses
	port	162.

Polycom, Inc. 419