Polycom 3725-77601-001H manual Add a Site

Dial Plan Setup Operations

Add a Site

To add a site

1Go to Admin > Dial Plan and Sites > Sites or Admin > Dial Plan and Sites > Site Topology.

2In the Sites list or Site Topology page, click Add Site.

3In the Add Site dialog box, enter a Site Name and Description for the site.

4Complete the General Info, Routing, Subnet, and if applicable ISDN Number Assignment, sections of the Add Site dialog box. The minimum information required is Site Name, Description, Location, and Subnets.

For information about all of the site fields, see “Add/Edit Site Dialog Box” on page 388.

5Click OK.

The new site is added to the system and the Edit Site Provisioning dialog box appears. These are the site-based parameters that the CMA system automatically provisions to endpoint systems operating in dynamic management mode.

6As needed, edit the default site provisioning details and click Apply.

		Note
		Not all of the site provisioning parameters apply to all endpoint systems being
		provisioned. If an endpoint system does not have a corresponding parameter, it
		ignores the parameter.
Field	For the endpoint systems at the site being provisioned...
Date and Time Settings
Country	Specify the country code for their location.
Date Format	Specify the date display format.
Auto Adjust for	Specify whether or not to adjust the endpoint’s system clock for daylight savings time.
Daylight Saving Time
Time Format	Specify the time display format.

Polycom, Inc. 465