Polycom 3725-77601-001H Call Detail Record Report Administration, Modify the CDR Retention Period

System Reports

Column	Description
Destination	Specifies the name, IP address, or alias of the endpoint
	that received the call. For point-to-point calls this is
	another endpoint. For multipoint calls using an MCU,
	this is the MCU.
Destination	Specifies the IP address of the endpoint that received
Address	the call.
Call Type	Specifies the type of call: scheduled or unscheduled.
Bandwidth (Kbps)	Specifies the bit rate that was used for the call.
Duration (min)	Specifies how long the call lasted in minutes, up to a
	maximum of 999.
Q.850 Code	Specifies the standard cause code for call termination.

2Use the Filter to customize the report by Date, IP Address, Endpoint Type, Call Type, and Duration.

Call Detail Record Report Administration

By default, the CMA system stores the conference and endpoint call detail records (CDRs) for 30 days. You can modify the CDR retention period and you can schedule a weekly archive of the CDRs. These procedures are described in the following topics.

Modify the CDR Retention Period

By default, the conference and endpoint CDRs are purged after 30 days.

To change how long CDR information is retained

1Go to Admin > Report Administration.

2In the Report Administration page, enter the number of Days to keep Conference and Endpoint CDRs.

3Click Save Settings.

Schedule Weekly Archives of the CDR Report

To schedule weekly archives of CDR information

1Go to Admin > Report Administration.

2In the Report Administration page, select Enable Weekly FTP Archiving of CDR Records.

Polycom, Inc. 285