Polycom 3725-77601-001H Motion option for Video quality, Video switching VSW option RMX General

Conference Setup Overview

Field	Description
Video clarity (MPM+	Applies video enhancing algorithms to incoming video
and MPMx only)	streams of resolutions up to and including SD. Clearer
	images with sharper edges and higher contrast are sent
	back to all endpoints at the highest possible resolution
	supported by each endpoint.
	This option is not available if you select any of the following:
	•	Motion option for Video quality
	•	Video switching (VSW) option (RMX General
		Settings)
Auto brightness (v7)	Detects and automatically adjusts the brightness of video
	windows that are dimmer than other video windows in the
	conference layout.
	This option is not available if you set Telepresence mode
	to On (RMX Video Settings).
RMX Video Quality > Content Video Definition
Content settings	Select the transmission mode for the content channel:
	•	Graphics — Basic mode, intended for normal graphics.
	•	Hi-resolution graphics — Higher bit rate intended for
		high resolution graphic display.
	•	Live video — Content channel displays live video.
		Selection of a higher bit rate for the content results in a
		lower bit rate for the people channel.
Content protocol	The possible values are:
	•	H.263 – Content is shared using H.263 even if some
		endpoints have H.264 capability.
	•	Up to H.264 – H.264 is the default content sharing
		algorithm. When selected:
		Content is shared using H.264 if all endpoints have
		H.264 capability.
		Content is shared using H.263 if all endpoints do not
		have H.264 capability.
		Endpoints that do not have at least H.263 capability
		can connect to the conference but cannot share
		content.

Polycom, Inc. 329