Polycom CMA System Operations Guide

The Device Details dialog box for the selected MCU appears.

 

Field

Description

 

 

 

 

Identification

 

 

 

 

 

System Name

The name of the MCU.

 

 

MCU names must be unique.

 

 

The name must be in ASCII only and may have an

 

 

unlimited number of characters. Spaces, dashes,

 

 

and underscores are valid.

 

 

When retrieved from the MCU, the name is taken

 

 

from the H.323 ID if the MCU registered with the

 

 

gatekeeper and it is a third-party system. In other

 

 

cases, it is the system name, which might be

 

 

different than the H.323 ID.

 

 

 

 

Device Type

The type of MCU. For valid types, see “Network Device

 

 

Types” on page 221.

 

 

 

 

IP Address

The assigned IP address of the MCU

 

 

 

 

Site

The network site for the MCU. By default, MCUs are

 

 

added to the Primary Site.

 

 

 

 

Product ID

 

 

 

 

 

Description

A free-form text field (Extended ASCII only) in which

 

 

information about the MCU can be added

 

 

 

 

Serial Number

The serial number (ASCII only) of the MCU.The MCU

 

 

provides the serial number if it registered successfully or

 

 

is managed.

 

 

 

 

Software Version

The version of the software installed on the MCU (ASCII

 

 

only). The MCU provides the version number if it

 

 

registered successfully or is managed.

 

 

 

 

HTTP URL

(RMX MCUs only) The management URL for the

 

 

endpoint, if available (ASCII only). This URL allows the

 

 

CMA system to start the endpoint ‘s management

 

 

system using the Manage function.

 

 

All Polycom endpoints allow device management

 

 

through a browser. For these endpoints, this field is

 

 

completed when the endpoint registers with the CMA

 

 

system.

 

 

For third-party endpoints that do not register using an IP

 

 

address, you must enter the URL.

 

 

 

 

HTTP Port

(RMX MCUs only) The HTTP port number for the MCU

 

 

communications. The MCU provides the port number if it

 

 

registered successfully and is managed.

 

 

By default, in non-secure (HTTP) mode, the RMX uses

 

 

port 80 and in secure (HTTPS) mode, the RMX uses port

 

 

443.

 

 

 

228

 

Polycom, Inc.

Page 248
Image 248
Polycom 3725-77601-001H manual Device Details dialog box for the selected MCU appears, Field Description Identification