Polycom 3725-77601-001H manual Actions in the Peripheral View

Polycom CMA System Operations Guide

The Peripherals list in this view has these fields.

Field	Description
Filter	Use the filter choices to display other views of the Endpoint
	list, which include:
	•	Type - Filters the list by type. For more information, see
		“Endpoint Configuration/Provisioning” on page 105.
	•	Paired Endpoint- Filters the list by the HDX or
		RealPresence Group Series to which the peripherals are
		connected.
	•	IP Address - Filters the list by IP address entered.
	•	Hardware Version - Filters the list by hardware version
		entered.
	•	Software Version - Filters the list by software version
		entered.
Status	The state of the peripheral. Possible values include:
	•	Connected		- Peripheral is connected to the endpoint.
	•	Disconnected		- Peripheral is turned off or no longer
		connected to the endpoint.
	•	Error	- Endpoint reports an error with the peripheral.
	•	Blank - Endpoint is not reporting that the peripheral is
		connected.
Paired Endpoint	Name of the endpoint to which the peripheral is connected or
	Not Paired. The Not Paired designation means the
	peripheral was connected to an endpoint, but it is not
	connected to one now.
Type	The type of peripheral.
Serial Number	The serial number of the peripheral.
IP Address	The IP address assigned to the peripheral, if applicable.
Area	(Available only when Areas are enabled.) The area with
	which peripheral is associated. The peripheral inherits its
	area from the endpoint to which the peripheral is connected.
Hardware Version	The hardware version of the peripheral.
Software Version	The software version of the peripheral.

Actions in the Peripheral View

Besides providing access to the peripherals, the Actions section of the Peripheral View may also include these context-sensitive commands depending on the selected peripheral type and its status.

94 Polycom, Inc.