Polycom 3725-77601-001H manual Subnets

Polycom CMA System Setup Overview

Field	Description
Allowed via H.323	Enables call routing via the Internet, using an
aware SBC or ALG	H.323-aware SBC (Session Border Control) or ALG
	(Application Level Gateway) server.

	Note
	For an outbound call to the Internet, you must enter the
	firewall gateway service (for example, a Polycom VBP
	appliance) code before the IP address in the dial string.
Call Signaling IP	IP address of the SBC or ALG server. Supports only
Address	IPv4 addresses.
Port	Port address of SBC or ALG server.
Send Unmodified Dial	Select this option if your SBC or ALG requires that the
String to SBC/ALG	original dial string is passed to it. For example, an H.323
	Annex O dial string such as user@company.com is
	passed directly to the SBC or ALG instead of resolving
	company.com to an IP address.
	Deselect this option if your equipment requires a dial
	string that is converted from company.com to
	gatekeeper IP address. This option is appropriate for
	the Polycom VBP.
Total Bandwidth	The total bandwidth of the pipe at the site.
Call Max Bit Rate	The maximum bandwidth that can be used for each
	intrasite call at the site. The default and maximum value
	is 2000000 (2 GB).
Subnets
Subnet IP	Specifies the subnets within the site. For each subnet,
Address/Mask	includes:
	•	IP Address range
	•	Subnet mask
	• Maximum bandwidth for the subnet
	• Maximum bit rate per call for the subnet

Enterprise Directory Settings—

Endpoint Enterprise Directory security group settings

Universal Security	When in secure mode, search and select groups that
Group Filter	are provisioned to the endpoints to represent the valid
	lists of users that can log in as a user or administrator. If
Enterprise Directory
	a user is not a member of one of the selected groups
Admin Group
	then the user is denied access to the endpoint.
Enterprise Directory
User Group

Polycom, Inc. 391