Dial Plan Setup Operations

4Click OK.

The new service is added to the system.

Edit a Service

You can make changes to a service.

Note

Be sure that the information you enter in the CMA system matches the information entered in the MCU.

To edit a service

1Go to Admin > Dial Plan > Services.

2In the Services list, select the service of interest and click Edit Service.

3As required, edit the General Info, and if applicable Simplified Dialing or Conference on Demand, sections of the Edit Service dialog box.

4Click OK.

Delete a Service

You can delete a gateway or MCU service from the CMA system. You cannot delete the Conference on Demand or Simplified Dialing service.

To delete a service

1Go to Admin > Dial Plan > Services.

2In the Services list, select the service of interest and click Delete Service.

3 Click Yes to confirm the deletion.

Notes

The system returns an error message if you attempt to delete any services that were added automatically when the MCU registered with the CMA system. To avoid this, first unregister and then delete the MCU.

MCU services added manually from the Services page are not affected by this error.

Polycom, Inc.

491

Page 511
Image 511
Polycom 3725-77601-001H manual Edit a Service, Delete a Service, Click OK New service is added to the system