Polycom 3725-77601-001H manual Applies to

Polycom CMA System Operations Guide

Field	For the endpoint systems being provisioned...	HDX Series	V\VSX Series	FX/EX	ViewStation	QDX Series
Snapshot Timeout	Lets you choose whether to have slides and snapshots	—	Y	—
	time out after a period of four minutes.
Dual Monitor Emulation	Specifies whether the system can show multiple views on	Y	Y	—
	a single display.
Output Upon Screen	Specifies whether black video or no signal is sent to the	Y		—		Y
Saver Activation	monitor when the system goes to sleep and the screen
	saver activates.
	• Select Black to display black video. This is the
	recommended setting to prevent burn-in for TV
	monitors.
	• Select No Signal to have the display react as if it is
	not connected when the system goes to sleep. This is
	the recommended setting for VGA monitors and
	projectors.
VGA Resolution		—	Y	—
Monitor 2 Options	Applies to:	Y	—	—		Y
Monitor 2	Specifies the second monitor’s aspect ratio:	Y	—	—		Y
	• Off — Select if you do not have a second monitor.
	• 4:3 — Select if you are using a regular TV monitor as
	the second monitor.
Video Format	Specifies the monitor’s format:	Y	—	—		Y
	• DVI — Select if the monitor is connected to the DVI
	connector using a DVI or HDMI cable.
	• VGA — Select if the monitor is connected to the DVI
	connector using a VGA cable.
	• Component YPbPr — Select if the monitor is
	connected to the DVI connector using component
	cables. Polycom HDX 8000 series and Polycom HDX
	7000 series systems do not support 720p Component
	format for 50 Hz monitors.
	• S-Video (Polycom HDX 9000 series only) — Select if
	the monitor is connected to the BNC connectors using
	an S-Video cable.
	• Composite (Polycom HDX 9000 series only) — Select
	if the monitor is connected to the BNC connectors
	using a composite video cable.

124 Polycom, Inc.