Polycom 3725-77601-001H No Prefix, Number specify, Based on Devicey Type, available only if shown

Dial Plan Setup Operations

	Field	Description
	Prefix	The Prefix is the first part of the E.164 Numbering
		Scheme and containz up to three options
		•	No Prefix
		•	A Number (specify)
		• Based on Devicey Type, available only if shown
		The fist option, No Prefix, means that there will not be
		any digits listed in front of the Base Field assignment
		The second option, A Number,(specify) allows for the
		specification of up to 7 digits, be careful, not to go over
		the allowable15-digit maximum.
		The third option, Based on Device Type, will only be
		visible in the Prefix if if it has not been already selected
		in the Suffix.
		If the Based on Device Type selection is available for
		selection, it will use the two-digits predefined device
		type. See the Based on Device Type Settings section.
	Base Field	There are two available options for the Base Field
		• Specify Number Range...
		•	Phone Number
		The first opton, Specify Number Range..., allows for the
		designation of a numeric range.The range may fall
		anywhere from 0 through 9999999999.
		The second option, Phone Number, allows for the
		assignment of a phone number from the Actrive
		Directory along with the number of digits to utilize from
		the phone number, and can range anywhere between 3
		to 10 digits. Or, in the event a phone number does not
		exist, a numeric range will be used instead, if defined,
		and it can be anywhere from 0 through 9999999999
	Suffix	The suffix is the last part of the three-part E.164
		Numbering Scheme and may contain up to three of its
		own options.
		•	No Suffix
		•	A Number (specify)
		• Based on Device Type.
		The first option, No Suffix, means that there will not be
		any digits listed after the Base Field designation of the
		E.164 Alias.
		The second option, A Number (specify), allows for the
		specification of up to 7 digits, be careful not to exceed
		the allowable 15 digit minimum.
		The third option, Based on Device Type, will use the
		two-digits predefined device type. See the Based on
		Device Type Settings section.
Polycom, Inc.			507