Polycom 3725-77601-001H manual Cancel Software Updates, Click Schedule, Fields Description

Polycom CMA System Operations Guide

2As needed, use the Filter to customize the endpoint list.

3Select the endpoints of interest and click Software Update.

4In the Schedule Software Update dialog box, specify when the update should occur.

a In the Schedule field, select Now or Later.

b If you select Later, enter a Date and Time for the update.

cSelect either Use Server Date/Time or Use Endpoint Date/Time as these may differ.

5Select from these options.

Fields	Description
Remove address	Select this check box to have all local address book
book entries	entries removed after the update.
Remove system files	Select this check box to have all endpoint settings
	removed after the update. You must then reconfigure
	the endpoint.
Allow endpoint to be	Select this check box to allow the endpoint to be a
a DHCP server	DHCP server.
	Applies to V-Series, VSX-Series, and ViewStation
	endpoints only. For more information, see the
	endpoint’s user guide.

Note

You may apply a single software update request to multiple endpoint models. If the request includes one or more scheduling options that are not valid for a selected endpoint model, the system applies only the options that are valid.

6Click Schedule.

For each endpoint selected, the status changes to Pending and the date and time for the software update appears in the Scheduled column.

Cancel Software Updates

You can cancel scheduled software updates for an endpoint. You cannot explicitly cancel automatic software updates for an endpoint. You must do that at the endpoint.

To cancel scheduled software updates

1Go to Endpoint > Scheduled Software Update.

210 Polycom, Inc.