Polycom 3725-77601-001H Field Description RMX General Settings Conference Settings, 264 720p30

Conference Setup Overview

Field

Description

RMX General Settings > Conference Settings

Video switching	In Video Switching mode, all participants see the same
(VSW)	video picture (full screen). The current speaker is displayed
	in full screen on all the participants’ endpoints, while the
	speaker sees the previous speaker. Switching between
	participants is voice-activated; whenever a participant starts
	to speak, he or she becomes the conference speaker and is
	viewed on all screens.
	When selected, the conference is of ultra-high quality video
	resolution, in a special conferencing mode which implies
	that all participants must connect at the same line rate and
	use HD video.
	This feature utilizes the resources more wisely and
	efficiently by:
	•	Saving utilization of video ports (1 port per participant as
		opposed to 4 ports in CP mode).
	•	Video display is in full screen mode only.
	Drawbacks of this feature are that all participants must
	connect at the same line rate, (for example, HD), and all
	participants with endpoints not supporting HD will connect
	as secondary (audio only).
	Video layout changes are not enabled during a conference.
	If HD 1080p is selected, endpoints that do not support HD
	1080p resolution are connected as secondary (audio only)
	participants.

		Note:
		• This option is not available if MGC is selected as a
		Supported MCU (General Settings).
		• Video Switching conferencing mode is unavailable to
		ISDN participants.
	Resolution	Possible values include:
		• H.264 SD 30(v7 with MPM+ or MPMx)
		• H.264 720p60(v7 with MPM+ or MPMx)
		• H.264 720p30
		• H.264 1080p30(MPM+ or MPMx)
	RMX General Settings > Advanced Settings
	Auto redialing	Instructs the Polycom RMX to automatically redial IP and
		SIP participants that have been abnormally disconnected
		from the conference.
		• The RMX will not redial an endpoint that has been
		disconnected from the conference by the participant.
		• The RMX will not redial an endpoint that has been
		disconnected or deleted from the conference by an
		operator or administrator.
Polycom, Inc.		327