Polycom 3725-77601-001H manual Dial Plan Service Operations, Conference on Demand

Dial Plan Setup Operations

Dial Plan Service Operations

Dial plan services are special features that video endpoint system users can invoke by dialing the prefix assigned in the CMA system to that service.

The CMA system has two default dial plan services:

•Conference on Demand

•Simplified Dialing

These services can be edited and disabled, but not deleted.

You can also add other gateway or If a service does not appear automatically when a device registers with the CMA system, you can define the service manually so that it is available for video endpoint system users. In addition, you can add services for certain third-party MCU services.

Conference on Demand

With Conference on Demand, video endpoint system users can start an unscheduled multipoint conference from their endpoint rather than requesting this service from an administrator.

The initiating endpoint uses the capabilities made available through the MCU. When Conference on Demand is enabled on the endpoint, the CMA system sends the call directly to the MCU.

Note

Conference on Demand is only available on Polycom RMX and MGC MCUs. It is not available on Polycom RMX 1000 MCUs.

The following table provides details on how the Conference on Demand service is configured.

Field	Description
General Info
Service Type	Conference on Demand (read only)
Enable	Indicates whether or not the service is enabled
Available for New Groups	Indicates whether or not the service is available for
	new user groups
Description	Description (ASCII only) of the service. By default for
	this service, Conference on Demand
Service Prefix	The prefix (ASCII only) for the service. By default for
	this service: con

Polycom, Inc. 485