Polycom 3725-77601-001H manual Edit a Polycom VBP Device, Delete a Polycom VBP Device

Management Operations for Other Network Devices

3Enter the SSH or console Password for the root user and click OK. The Polycom VBP device appears in the Network Device list.

Edit a Polycom VBP Device

To edit a Polycom VBP device

1Go to Network Device > VBPs

2Select the Polycom VBP device of interest and click Edit .

3 Configure these settings as needed in the Edit VBP dialog box. 4 Click OK.

Delete a Polycom VBP Device

To delete a Polycom VBP device from a CMA system

1Go to Network Device > VBPs.

2Select the Polycom VBP device of interest and click Delete .

3 Click Yes to confirm the deletion.

Identify Endpoints Using the Polycom VBP Device

Note

This procedure identifies only Polycom HDX, Polycom RealPresence Group Series, and CMA Desktop systems that are:

•Registered to the CMA system

•Using the Polycom VBP firewall

•Operating in dynamic-management mode.

One Polycom HDX or legacy endpoint system operating in standard management mode, registered to the CMA system, and using the Polycom VBP firewall may also be displayed in the Endpoint list. This entry may represent multiple endpoints, since all Polycom HDX or legacy endpoint system operating in standard management mode register with the same information.

To identify which endpoints are using the Polycom VBP firewall

1Go to Endpoint > Monitor View.

2Click Select Filter and select IP Address.

Polycom, Inc. 241