23
PT1911MX Optional Capacitive Calibration Tool Install:
If you would like to use the Optional Capacitive Calibration Tool, follow the instructions below:
1.Open the
2.Select the Monitor Size and then Model Number.
3.Click on the “Load Utility” button that appears to the right of the Model Number.
4.The HID calibration tool will automatically open. From here the user can choose to do the following:
a.4 Points Calibration
b.9 Points Linearization
c.25 Points Linearization
d.Clear
e.Draw Test
f.Advanced. In the Advanced settings area the user may do the following:
i.Adjust the Double Click Area
ii.Enable auto right click and adjust the auto right click time
iii.Choose to be either in the HID Mouse Mode or HID Digitizer Mode (Windows® Vista only)
iv.Simply click the “Apply” button once the settings are finalized.
If you are using a PC running Windows® XP, 2000, ME, 98, or Linux operating systems, follow the instructions below.
Using the RS232 connection:
1. Be sure that RS232 cable is connected to the computer.
