Polycom 3725-77601-001H manual On the Directory Ldap Mark the Provision This Page check box

Polycom CMA System Operations Guide

3Click Update.

Configure LDAP Settings

In addition to configuring directory listing support in the directory set up, you need to also ensure that the LifeSize endpoint is configured to use the RealPresence CMA system’s LDAP settings. You can provision these through a scheduled provisioning profile or configure them manually on the endpoint.

To add LDAP settings to a scheduled provisioning profile

1Go to Admin > Provisioning Profiles > Scheduled Provisioning Profiles.

2In the Scheduled Provisioning Profiles page, click Add.

3In the Add Profile dialog box, select the Endpoint Type for the provisioning profile, enter a name for the profile, and click Next.

4As needed, complete the various settings that you would like to provision for your LifeSize endpoint.

For more information about these fields, see “Scheduled Provisioning of Polycom Endpoints” on page 114.

5For Directory support, select the Directory > LDAP page.

6 On the Directory > LDAP page:

a Mark the Provision This Page check box.

b In the LDAP field, select Enabled from the drop-down list.

»In the LDAP Username field, enter uid=ldapgab,ou=system

»In the LDAP Password field, enter the password for the Polycom Global Address Book if you have one. If not, leave this field blank.

»In the LDAP Base field, enter DC=Polycom,dc=com

7Click OK.

If you manually enter the LDAP settings on the LifeSize endpoint, the value for the LDAP Base field needs to be the following:

OU=Endpoints,DC=Polycom,dc=com.

370 Polycom, Inc.