Polycom 3725-77601-001H manual Delete an Endpoint, Go to Endpoint Monitor View

Endpoint and Peripheral Management Operations

To edit an endpoint in the CMA system

1Go to Endpoint > Monitor View

2As needed, use the Filter to customize the endpoint list.

3 Select the endpoint of interest and click Edit .

4As required, edit the Identification, Addresses, and Capabilities sections of the Edit Device dialog box. For more information, see “View Device Details” on page 166.

Note that many fields in this dialog box are ASCII only.

5Click Update.

Note

Editing information for an endpoint on the CMA system does not change the information in the endpoint. To make changes in the endpoint information, use Provisioning or change it at the endpoint interface. Note that for managed endpoints, the endpoint may overwrite settings entered manually.

Delete an Endpoint

To delete an endpoint from the CMA system

1Go to Endpoint > Monitor View

2As needed, use the Filter to customize the endpoint list.

3 Select the endpoint of interest and click Delete. 4 Click Yes to confirm the deletion.

The Endpoint list is updated.

Note

If your gatekeeper registration policy allows endpoints to register automatically with the CMA system (that is, a gatekeeper setting of Allow Registration of All Endpoints or Allow Registration of Endpoints in Defined Sites or Allow Registration of Predefined Prefixes Only) an endpoint that you delete may re-appear in the Endpoint list.

Polycom, Inc. 175